Height of the Tire's Sidewall The two-digit number following the slash in thetire size description is the tire's aspect ratio. Itis the sidewall height expressed as a percentage of thetire's width. If the markings say 255/55R18, it means thatthe height of the sidewall is 255 multiplied by . 55, or 140millimeters.
.
Simply so, what do the numbers on the tire mean?
The two-digit number that usually follows thetire's section width tells us the aspect ratio, ortire profile measurement. In this example, the 45 indicatesthat the sidewall distance, from the wheel rim to the outside ofthe tread, is 45% of the section width.
Subsequently, question is, how do you read tire numbers? Tire Size Markings
- P = Passenger Car Tire. The first letter on a tire indicatesthe tire's class.
- 245 = Section Width. Tread (mm)
- 45 = Aspect Ratio. (Ratio of Sidewall height to width)
- Z = Speed Rating. S = 112mph.
- R = Radial. Construction.
- 19 = Wheel. Diameter.
- 98 = Load. Index.
- W = Speed. Rating.
Then, what do the letters and numbers on a tire mean?
With a little explanation it's easy to understand whatall of the letters and numbers mean on your tire'ssidewall. The numbers are indicators of the size, type, andperformance of the tire. Enter your information to see thetires that fit your vehicle.
What does the 94v mean on a tire?
R16: R: The R means this is a radialtire. 94V: 94 is a measurement of thetire's load index, or how much weight each tire cansupport. This number is not required by law to appear on alltires (it is included elsewhere on your tiresidewall). A 94 will support 1,477 pounds.
Related Question AnswersWhat does r17 on a tire mean?
R stands for radial construction. B means beltedbias and D stands for diagonal bias construction. 17 The lastdimension listed in the size is the diameter of the wheel rim,which is most often measured in inches. LOAD INDEX AND SPEEDRATING. Example: P225/50/R17 98H.How do I tell how old a tire is?
The date of manufacture is the last four digits of theDOT code. The first two digits are the week of manufacture, and thelast two digits are the year. For example, if the last four digitsof the DOT code are 0203, that means that the tire wasmanufactured during the second week of the year 2003.Can you put different width tires on same rim?
Rim Width Range. Because tires haveflexible sidewalls, a single tire size will fit on avariety of rim widths. The width of the rimwill influence the width of the tire. Atire mounted on a narrow rim would be "narrower" thanif the same size tire was mounted on a widerim.What does LT mean on a tire?
Light TruckDo wider tires handle better?
Advantages. Larger tires improve handling andcornering, due to wider tread faces and stiffer sidewalls.Wider tires may decrease braking distances on dry pavement.Wider tires may also increase acceleration, especially invery powerful vehicles such as muscle cars.What does 215 mean on a tire?
Tire Width: 215/65 R15 “215” in this sequence refers to thetire's width in millimeters. In other words, this tire is215 millimeters wide, from sidewall tosidewall.What is H or V rating on tires?
The letters "H" and "V" represent speedratings. The rating is the speed the tire hasbeen tested to for continuous safe driving. The English equivalentspeed for H-rated tires is 130 mph andV-rated tires are good for up to 149mph.Can I use tires with different aspect ratio?
The tire with the 55 aspect ratio is goingto be turning faster than the one on the other side of the car. Itwon't hurt the car as a temporary measure, but it's never a goodidea to put different sized tires on the same end ofthe car. Switch the other front to P185/55R15 or switch back toP185/65R15 for the new tire.What does SL mean on a tire?
Standard LoadWhat is a 265 70r17 in inches?
Tire Tech: Diameter Comparison of Light Truck Tire Sizes| Approx. Tire Diameter (in Inches) | P-Metric and European Metric | LT-Metric |
|---|---|---|
| 75-series and 70-series | 75-series and 70-series | |
| 31-1/2 | 265/70R17 | LT265/75R16 |
| 265/75R16 | ||
| 31 | 275/70R16 | LT245/70R17 |
How wide is a 265 tire?
16-inch Wheel Conversion Chart| Metric | Standard |
|---|---|
| 245/75/16 | 30.5"x 9.6" |
| 255/70/16 | 30.0"x 10.0" |
| 265/70/16 | 30.6"x 10.4" |
| 265/75/16 | 31.6"x 10.4" |
How wide is a 285 tire?
The sidewall height is a percentage of the width of thetire. This second number is that percent. The sidewallheight or "aspect ratio" of a 285/75/R16 tire is 75%of 285mm. Example: 285/75R16 (285 X 75 / 2540 x 2) +16 = 32.8 inches tall.How do you measure tire sizes?
How to Measure Car Tire Size- Make sure the tire is completely inflated and is mounted on thevehicle.
- Measure the width of the tread of the tire. This is thedistance from the tread's inner edge to its outer edge.
- Measure the diameter of the tire. This is the outside width ofthe tire.
- Measure the height of the tire.
How do I find out my rim size?
Locate the stamped size on the back of the hub onthe rim. This is the assigned measured size of therim, and it is broken into three sizes: diameter,width and bolt pattern. For example, a 14 by 6 by 4.5 reading onthe rim indicates that the diameter of the rim is 14inches, and it will accommodate most 14-inch tires.How wide is a 225 tire?
Equivalency table| Rim width | Minimum tyre width | Ideal tyre width |
|---|---|---|
| 7,5 Inches | 205 mm | 215 or 225 mm |
| 8,0 Inches | 215 mm | 225 or 235 mm |
| 8,5 Inches | 225 mm | 235 or 245 mm |
| 9,0 Inches | 235 mm | 245 or 255 mm |
